My Cart


You have no items in your shopping cart.

Sign up for Bee-Mail

More Views

BeeHut House


Availability: In stock

Short Description

The BeeHut house is perfectly sized for the beginner native bee raiser or for smaller yards or gardens.  House design and material provides optimal protection for nesting bees.



The BeeHut house is strong, durable and simple to install.

  • Made of weather-resistant PVC material, safe for agricultural use and can be painted.
  • Slightly ridged exterior directs water to ground.
  • Interior lip helps to prevent water from entering tube, keeping bees and nesting material dry during spring showers.
  • Will hold 40 spring mason BeeTubes, 50 summer BeeTubes, 20 large natural reeds, 30 small natural reeds or 1-12 hole or 1-20 hole reusable wood tray.
  • Size:  9 1/2" deep x 3 1/2" diameter

Bees and nesting material not included.

Wood stand not included.

Additional Information

Additional Information


Mason bees prefer morning sun.  Install your BeeHut House on a southern or eastern facing wall with good visibility.  Although these gentle bees don’t mind nesting high, we suggest that you install the BeeHut at a height that will allow you to easily view them and watch their activity.  A flat surface is best, such as a wall or fence, where the bees can sun themselves and/or mate.  If possible, place your BeeHut House under an overhang that keeps the wall and bee house dry.

Installation instructions

1. Select a location facing early morning sun to awaken and warm your bees.

2. Position 5-7 feet from the ground for easy viewing and to deter pests.

3. Remove the base cap (with mounting holes) and secure the cap to a wall, fence, or flat surface using screws (recommended) or nails.  Note: screws/nails not included due to varying mounting surfaces and thicknesses.

4. Goal is to have a slight downward angle for rain protection but not so steep that the nesting material falls out.  Achieve this angle by first tightening and then backing the top screw out one full turn and the bottom screw ½ of a turn after tightening. If securing with nails, do not drive top nail flush to achieve same angle as screw mounting.

5. Gently push the BeeHut housing into the mounted base cap. 

Free ShippingNo